Product Description

Box  type BSMJ Low Voltage Shunt Power Capacitor

General Description:

ZHIYUE brand of self-healing type low voltage shunt capacitor made of the advanced metalized film, is produced strictly in accordance with the Nation Standard and IEC standard by the introduced advanced foreign techniques and equipment. The device is suitable for low voltage power network to improve power factor, reduce reactive loss and better the voltage quality.

Characteristics:

1.Small volume, light weight and convenient installation
2.No oil leakage, no-toxic and environment protection
3.Low loss, little radiation and low temperature rise
4.Excellent self-healing performance
5.Safety

Working condition:

1.Altitude: lower than 2000m
2.Ambient temperature: -25~50℃degree
3.Humidity: smaller than 85%
4.After the power cut off, reputing when make sure the remain voltage is smaller than 10% of the rated voltage, usually this time is 200s, so the controller you use should has the function of time delay for reputing after cut off.

Technical data:
2.Rated voltage: 230VAC, 400VAC, 525VAC, 690VAC, 750VAC, 1050VAC, 1200VAC
3.Rated output: 1-60 KVAR
4.Rated frequency: 50Hz or 60Hz
5.Capacitance Tolerance: -5% - +10%
6.Tangent of the loss angle: With the power frequency rated voltage,
7.Withstand voltage: Between terminal 2.15 times rated voltage for 5 seconds, between terminals and container 2 Un+2Kv or 3KVAC choose the higher one for 10 seconds.
8.Max permissible over-voltage: 110% rated voltage
9.Max permissible over-current: 130% rated current
10.Self-discharge feature: Less than 50V in 3min after power broke down when the DC is√2 Un as before increased by the capacitors.
11.Applicable standard: GB/T 12747-2004, IEC60831-2002.

Model BSMJ
BCMJ BZMJ
Rated
Voltage(kV)
Rated
Output (kvar)
Rated
Capacitor(uF)
Rated
Current(A)
H
(mm)
Output
Terminal
Shell
Type
0.23-1-1 0.23 1 60.2 4.3 125 M6 A2
0.23-3-1 0.23 3 180.5 13 125 M6 A2
0.23-5-1 0.23 5 301 21.7 125 M6 A2
0.23-7.5-1 0.23 7.5 451.5 32.6 210 M8 A2
0.23-10-1 0.23 10 602 43.5 210 M8 A2
0.23-15-1 0.23 15 903 65.2 210 M8 B2
0.23-20-1 0.23 20 1203.4 87 260 M8 B2
0.23-25-1 0.23 25 1504.3 108.7 330 M10 B2
0.23-30-1 0.23 30 1805.2 130.4 230 2*M10 C
 0.4-4-1  0.4  4  79.6 10  125  M6  A2
 0.4-5-1  0.4  5  99.5  12.5  125  M6  A2
 0.4-6-1  0.4  6  119.4  15.0  125  M6  A2
 0.4-7.5-1  0.4  7.5  149.2  18.8  125  M6  A2
 0.4-8-1  0.4  8  159.2  20.0  125  M6  A2
 0.4-10-1  0.4  10  198.9  25  180  M6  A2
 0.4-12-1  0.4  12  238.7  30  180  M6  A2
 0.4-14-1  0.4  14  278.5  35  210  M6  A2
 0.4-15-1  0.4  15  298.4 37.5  210  M6  A2
 0.4-16-1  0.4  16  318.3  40  210  M6  A2
 0.4-18-1  0.4  18  358.1  45.0  210  M8  B2
 0.4-20-1  0.4  20  397.9  50  210  M8  B2
 0.4-22-1  0.4  22  437.7  55  210  M8  B2
 0.4-25-1  0.4  24  497.4  62.5  210  M8  B2
 0.4-30-1  0.4  30  596.8  75  260  M8  B2
 0.4-35-1  0.4  35  696.3 87.5  330  M8  B2
 0.4-40-1  0.4  40  796.2  100  330  M8  B2
 0.4-45-1  0.4  45  895.2  112.5  230 2*M10  C
 0.4-50-1  0.4  50  995.2  125  230  2*M10  C
 0.4-60-1  0.4  60  1194.3  150  280  2*M10  C
 0.45-4-1  0.45  4  62.9  8.9  125  M6  A2
 0.45-5-1  0.45  5  78.6  11.1  125  M6  A2
 0.45-6-1  0.45  6  94.3  13.3  125  M6  A2
 0.45-7.5-1  0.45  7.5  117.9  16.7  125  M6  A2
 0.45-8-1  0.45  8  125.8  17.8  125  M6  A2
 0.45-10-1  0.45  10  157.2  22.2  180  M6  A2
 0.45-12-1  0.45  12  188.6  26.7  180  M6  A2
 0.45-14-1  0.45  14  220.1  31.1  210  M8  A2
 0.45-15-1  0.45  15  235.8  33.3  210  M8  A2
 0.45-16-1  0.45  16  251.5  35.6  210  M8  A2
 0.45-18-1  0.45  18  282.9  40  210  M8  A2/B2
 0.45-20-1  0.45  20  314.4  44.4 210  M8  A2/B2
 0.45-22-1  0.45  22  345.8  48.9  210  M8  B2
 0.45-25-1  0.45  25  393.2  55.6  210  M8  B2
 0.45-30-1  0.45  30  471.8  66.7  210  M8  B2
 0.45-35-1  0.45  35  550.2  77.8  260  M8  B2
 0.45-40-1  0.45  40  629.1  88.9  260  M8  B2
 0.45-45-1  0.45  45  707.4  100  230  M10  C
0.45-50-1  0.45  50  786.3  111.1  230 2* M10  C
0.45-60-1  0.45  60  943.6  133.3  230  2*M10  C